瑞星卡卡安全论坛

该用户帖子内容已被屏蔽

您可以下载SREng

打开后点智能扫描．勾选检查进程模块的数字签名，点扫描．把日志以log日志导出并作为附件贴到论坛里．

第二楼见SREng操作方法

该用户帖子内容已被屏蔽

找张启动盘，先把系统起来，然后对系统进行还原（可以用还原点，有专门的软件或者备份更好）。最后重启进入系统，把能关闭的软件和程序尽量都关闭，然后安装瑞星（要安装在默认盘符下）。试试吧，应该行。

见过有人在2000版上装瑞星了..个人觉得是你那硬盘矩阵的事..你装的是个人版的瑞星?

CTRL+G进入磁盘阵列的设置．或者找磁带机恢复一下

该用户帖子内容已被屏蔽

该用户帖子内容已被屏蔽

参考此帖：http://bbs.ikaka.com/showtopic-8404665.aspx
上传蓝屏文件分析。

这个服务器内建的是ATI的显示核心吧  使用的驱动是什么版本的 。
杀毒软件的版本是多少

呵呵..终于查到你的问题所在了..有个家伙和你一样也是2003版的及raid..装卡巴后就蓝屏..卸了后就好..下面是卡巴技术支持给他的回复..简单的说就是到HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\下把杀软的启动等级调低..把值调为2 就行了..让硬盘驱动加载完了再启动杀软....那家伙照做后就解决问题..有兴趣的话你也可以试试...具体下面..

A solution to this problem was provided to me by Kaspersky's Support
team.

There is a registry entry that controls the load order of the
Kaspersky driver that causes this error.

The key is located at:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic  es\Klif

Inside of the Klif key is an entry named "Start" the default value is
1.

The possible values for the entry are 1,2, and 3.

The values define the order of driver load:

1. Boot
2. Automatic
3. Demand

Level "2" allows the driver to load after all main drivers have been
loaded.

Kaspersky asked that I try using value "2" by booting into safe mode
and changing the value.  They said that this does not reduce
protection level at any rate, but can solve conflicts that can occur
with the IRP stack.

I followed their advice and changed the value from 1 to 2 and it fixed
the problem.