我刻录一本电子书到光盘上，总是刻到百分之50几的时候失败
一连刻了几张都是这样
之前用同样的碟和同一台机子刻别的文件都可以刻录成功，但这个不知道怎么回事啊，各位高手赶快指点一下吧……
多谢了
刻录的记录如下：
番茄花园
番茄花园
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004-7-22 17:33:44
Nero版本： 6.3.1.25 (Nero Express)
刻录机： <TSSTcorp CDW/DVD TS-L462C>版本: CH00 - HA 1 TA 0 - 6.3.1.25
适配卡驱动程序： <atapi> HA 1
Drive buffer : 1536kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TSSTcorp CDW/DVD TS-L462C>版本: CH00 - HA 1 TA 0 - 6.3.1.25
适配卡驱动程序： <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS541080G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDW/DVD TS-L462C atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CDW/DVD TS-L462 G: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 495MB (507248kB)
Free physical memory: 137MB (141212kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.12.2008
CD-ROM (ISO)
20:58:09 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:58:09 #2 Phase 89 File dlgbrnst.cpp, Line 1855
超级链接已激活
20:58:10 #3 Text 0 File Reader.cpp, Line 126
Reader running
20:58:10 #4 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CDW/DVD TS-L462C running
20:58:10 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
20:58:10 #6 Text 0 File Burncd.cpp, Line 3152
Turn on 轨道一次刻录, using CD-R/RW media
20:58:11 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 14462 ( 3:14.62)
20:58:11 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
20:58:11 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: TSSTcorp CDW/DVD TS-L462C;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
20:58:11 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:58:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 14463 (14463) = #14463/3:12.63
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 14461 blocks [TSSTcorp CDW/DVD TS-L462C]
--------------------------------------------------------------
20:58:13 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CDW/DVD TS-L462C] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 29927424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
14463 | lead-out | 1 | 0x00 | 0x41
20:58:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 14463 -> 14461.
20:58:13 #14 Phase 24 File dlgbrnst.cpp, Line 1855
文件暂存过程开始
20:58:13 #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
20:58:13 #16 Phase 25 File dlgbrnst.cpp, Line 1855
文件暂存过程完成
20:58:14 #17 Phase 36 File dlgbrnst.cpp, Line 1855
以20x (3,000 KB/s)的速度开始刻录
20:58:14 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:58:15 #19 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Super Link -> ON
20:58:40 #20 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03CF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x05 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
20:58:40 #21 CDR -1135 File Writer.cpp, Line 304
写错误
20:58:40 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
20:58:40 #23 CDR -201 File WriterStatus.cpp, Line 196
写入状态无效
TSSTcorp CDW/DVD TS-L462C\H1 T0
20:58:40 #24 TRANSFER -18 File WriterStatus.cpp, Line 196
无法执行结束轨道
20:58:40 #25 Text 0 File Mmc.cpp, Line 15480
<TSSTcorpCDW/DVD TS-L462C> start Close Session
20:59:15 #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
20:59:15 #27 Phase 38 File dlgbrnst.cpp, Line 1855
以20x (3,000 KB/s)的速度刻录失败
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 2008-4-13 11:40:32 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
用户系统信息：Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1)